Description
Details
Scout Wave is an antenna designed to receive analogue and digital TV signals and FM radio, with extremely small dimensions (105 mm in diameter and 200 mm in height), ideal for installation on any type of boat.
The antenna is omnidirectional, and allows effective 360° signal reception both when moving and when stationary without the need to reposition the antenna.
The new internal high-gain (25dB) and low-noise amplifier offers sharp image reception in both vertical and horizontal polarization. Together with it, the splitter / power supply with two outputs allows you to connect TV and FM radio to the same antenna receiving both signals.
The hermetic cover of the Wave is made of UV-resistant material to prevent yellowing over time. The antenna offers two types of possible installations: on a standard base with 1" x 14 thread connection or directly on a flat (non-metallic) surface using the template and the mounting set supplied with the antenna. Both installations are easy and quick implementation.
Wave is supplied together with a complete assembly set consisting of:
– 12V power supply with 2 outputs (TV / Radio)
– 12V power cord with fuse
– Highly shielded 75 Ohm RG-6 coaxial cable (10 m)
– TV cable (1m)
– F-type connectors (2 pcs)
– Screws (2 pcs)
– Washers (4 pcs)
– Grower washers (2 pcs)
– Dice (4 pcs)
The connection of the system is easy and thanks to the two-output power supply it is possible to connect TV and FM radio to the same antenna.
The exclusive design, the extremely compact dimensions (11 cm diameter) and the high quality reception make the Wave the perfect choice for your on-board TV system.
Technical specifications:
Frequency: 40-860MHz
Impedance: 75 ohms
Channels: 2-69
Gain: 25dB
Power supply: 12 Volt DC
Noise: <1.7dB
Outputs: 2
Connectors: F
Diameter 11cm
Height: 20cm
Material: UV resistant ASA
Weight: 0.30kg
Click here to see the instruction manual
Made in Italy
The antenna is omnidirectional, and allows effective 360° signal reception both when moving and when stationary without the need to reposition the antenna.
The new internal high-gain (25dB) and low-noise amplifier offers sharp image reception in both vertical and horizontal polarization. Together with it, the splitter / power supply with two outputs allows you to connect TV and FM radio to the same antenna receiving both signals.
The hermetic cover of the Wave is made of UV-resistant material to prevent yellowing over time. The antenna offers two types of possible installations: on a standard base with 1" x 14 thread connection or directly on a flat (non-metallic) surface using the template and the mounting set supplied with the antenna. Both installations are easy and quick implementation.
Wave is supplied together with a complete assembly set consisting of:
– 12V power supply with 2 outputs (TV / Radio)
– 12V power cord with fuse
– Highly shielded 75 Ohm RG-6 coaxial cable (10 m)
– TV cable (1m)
– F-type connectors (2 pcs)
– Screws (2 pcs)
– Washers (4 pcs)
– Grower washers (2 pcs)
– Dice (4 pcs)
The connection of the system is easy and thanks to the two-output power supply it is possible to connect TV and FM radio to the same antenna.
The exclusive design, the extremely compact dimensions (11 cm diameter) and the high quality reception make the Wave the perfect choice for your on-board TV system.
Technical specifications:
Frequency: 40-860MHz
Impedance: 75 ohms
Channels: 2-69
Gain: 25dB
Power supply: 12 Volt DC
Noise: <1.7dB
Outputs: 2
Connectors: F
Diameter 11cm
Height: 20cm
Material: UV resistant ASA
Weight: 0.30kg
Click here to see the instruction manual
Made in Italy
Questions
There are no product questions yet.
Be the first to review this product
© 2019 MareMossoForzaSette.it All Rights Reserved. | Da Franco S.n.c. di Azie D & G. | Via Del Platano n° 11 - 57025 Piombino (LI) Italy - P.Iva 01422160497 |